Heat Transfer Vinyl
GIMME5
Blade: 45°
Temperature: 140°C – 285°F
Time: 4 Seconds
Pressure: Medium
Peel: Hot
Cutter Settings:
Cricut Explorer | Vinyl
Cricut Maker | Iron On
Silhouette Cameo 4 | Blade – 2, Speed – 5, Force – 14, Pass – 1
Silhouette Cameo 3 | Blade – 2, Speed – 5, Force – 14, Pass – 1
Graphtec CE | Blade – 10, Force – 15, Tool – BS001 + 0, Speed 40cm/s
US Cutter Prism | Force – 100, Speed – 300
See Full Instructions: GIMME5_spec sheet
GIMME5-SPECIAL
Blade: 45°
Temperature: 140°C – 285°F
Time: 4 Seconds
Pressure: Medium
Peel: Hot
Cutter Settings:
Cricut Explorer | Vinyl
Cricut Maker | Iron On
Silhouette Cameo 4 | Blade – 2, Speed – 5, Force – 14, Pass – 1
Silhouette Cameo 3 | Blade – 2, Speed – 5, Force – 14, Pass – 1
Graphtec CE | Blade – 10, Force – 15, Tool – BS001 + 0, Speed 40cm/s
US Cutter Prism | Force – 100, Speed – 300
See Full Instructions: GIMME5 SPECIAL_spec sheet
GIMME5-FLUO
Blade: 45°
Temperature: 140°C – 285°F
Time: 4 Seconds
Pressure: Medium
Peel: Hot
Cutter Settings:
Cricut Explorer | Vinyl
Cricut Maker | Iron On
Silhouette Cameo 4 | Blade – 2, Speed – 5, Force – 14, Pass – 1
Silhouette Cameo 3 | Blade – 2, Speed – 5, Force – 14, Pass – 1
Graphtec CE | Blade – 10, Force – 15, Tool – BS001 + 0, Speed 40cm/s
US Cutter Prism | Force – 100, Speed – 300
See Full Instructions:GIMME5 FLUO_spec sheet_
BF-700
Blade: 45°
Temperature: 140°C – 285°F
Time: 10 Seconds
Pressure: Medium
Peel: Hot
Cutter Settings:
Cricut Explorer | Vinyl
Cricut Maker | Iron On
Silhouette Cameo 4 | Blade – 2, Speed – 5, Force – 14, Pass – 1
Silhouette Cameo 3 | Blade – 2, Speed – 5, Force – 14, Pass – 1
Graphtec CE | Blade – 10, Force – 15, Tool – BS001 + 0, Speed 40cm/s
US Cutter Prism | Force – 100, Speed – 300
See Full Instructions: BF 700_spec sheet
BF-700-SPECIAL
Blade: 45°
Temperature: 140°C – 285°F
Time: 10 Seconds
Pressure: Medium
Peel: Hot
Cutter Settings:
Cricut Explorer | Vinyl
Cricut Maker | Iron On
Silhouette Cameo 4 | Blade – 2, Speed – 5, Force – 14, Pass – 1
Silhouette Cameo 3 | Blade – 2, Speed – 5, Force – 14, Pass – 1
Graphtec CE | Blade – 10, Force – 15, Tool – BS001 + 0, Speed 40cm/s
US Cutter Prism | Force – 100, Speed – 300
See Full Instructions: BF 700 SPECIAL_spec sheet
BF-700-FLUO
Blade: 45°
Temperature: 140°C – 285°F
Time: 10 Seconds
Pressure: Medium
Peel: Hot
Cutter Settings:
Cricut Explorer | Vinyl
Cricut Maker | Iron On
Silhouette Cameo 4 | Blade – 2, Speed – 5, Force – 14, Pass – 1
Silhouette Cameo 3 | Blade – 2, Speed – 5, Force – 14, Pass – 1
Graphtec CE | Blade – 10, Force – 15, Tool – BS001 + 0, Speed 40cm/s
US Cutter Prism | Force – 100, Speed – 300
See Full Instructions: BF 700 FLUO_spec sheet
BF-FATTY
Blade: 60°
Temperature: 150°C – 305°F
Time: 20 Seconds
Pressure: Light – Medium
Peel: Cold
Cutter Settings:
Cricut Explorer | Light Cardstock
Cricut Maker | Light Cardstock
Silhouette Cameo 4 | Blade – 10, Speed – 1, Force – 33, Pass – 1
Silhouette Cameo 3 | Blade – 10, Speed – 1, Force – 33, Pass – 1
Graphtec CE | Blade – 32, Force – 26, Tool – BS002 + 0, Speed 10cm/s
US Cutter Prism | Force – 280, Speed – 300
See Full Instructions: BF FATTY_spec sheet
BF-FLOCK
Blade: 60°
Temperature: 160°C – 320°F
Time: 16 Seconds
Pressure: Light – Medium
Peel: Warm, Wait 6-7 Seconds
Cutter Settings:
Cricut Explorer | Vinyl
Cricut Maker | Vinyl
Silhouette Cameo 4 | Blade – 4, Speed – 5, Force – 6, Pass – 1
Silhouette Cameo 3 | Blade – 4, Speed – 5, Force – 6, Pass – 1
Graphtec CE | Blade – 10, Force – 15, Tool – BS001 + 0, Speed 30cm/s
US Cutter Prism | Force – 100, Speed – 300
See Full Instructions: BF FLOCK_spec sheet
BF-GLAM
Blade: 45°
Temperature: 140°C – 285°F
Time: 12 Seconds
Pressure: Medium
Peel: Hot
Cutter Settings:
Cricut Explorer | Vinyl
Cricut Maker | Holographic Heat Transfer
Silhouette Cameo 4 | Blade – 2, Speed – 8, Force – 20, Pass – 1
Silhouette Cameo 3 | Blade – 2, Speed – 8, Force – 20, Pass – 1
Graphtec CE | Blade – 10, Force – 20, Tool – BS001 + 0, Speed 30cm/s
US Cutter Prism | Force – 100, Speed – 300
See Full Instructions: BF GLAM_spec sheet
BF-GLITTER
Blade: 45°
Temperature: 145°C – 295°F
Time: 10 Seconds
Pressure: Medium
Peel: Hot
Cutter Settings:
Cricut Explorer | Vinyl
Cricut Maker | Vinyl
Silhouette Cameo 4 | Blade – 10, Speed – 8, Force – 16, Pass – 1
Silhouette Cameo 3 | Blade – 10, Speed – 8, Force – 16, Pass – 1
Graphtec CE | Blade – 10, Force – 20, Tool – BS001 + 0, Speed 40cm/s
US Cutter Prism | Force – 150, Speed – 300
See Full Instructions: BF GLITTER_spec sheet
BF-SANDY-GLITTER
Blade: 60°
Temperature: 150°C – 305°F
Time: 10 Seconds
Pressure: Medium
Peel: Hot
Cutter Settings:
Cricut Explorer | Light Cardstock
Cricut Maker | Light Cardstock
Silhouette Cameo 4 | Blade – 10, Speed – 3, Force – 33, Pass – 1
Silhouette Cameo 3 | Blade – 10, Speed – 3, Force – 33, Pass – 1
Graphtec CE | Blade – 10, Force – 11, Tool – BS001 + 0, Speed 30cm/s
US Cutter Prism | Force – 150, Speed – 300
See Full Instructions: BF SANDY GLITTER_spec sheet
BF-GLOW-IN-THE-DARK
Blade: 45°
Temperature: 145°C – 295°F
Time: 12 Seconds
Pressure: Medium
Peel: Warm, Wait 6-7 Seconds
Cutter Settings:
Cricut Explorer | Vinyl
Cricut Maker | Vinyl
Silhouette Cameo 4 | Blade – 8, Speed – 8, Force – 20, Pass – 1
Silhouette Cameo 3 | Blade – 8, Speed – 8, Force – 20, Pass – 1
Graphtec CE | Blade – 10, Force – 17, Tool – BS001 + 0, Speed 30cm/s
US Cutter Prism | Force – 100, Speed – 300
See Full Instructions: BF-GLOW-IN-THE-DARK_spec-sheet
BF-METALLIC
Blade: 45°
Temperature: 140°C – 285°F
Time: 12 Seconds
Pressure: Medium
Peel: Hot
Cutter Settings:
Cricut Explorer | Vinyl
Cricut Maker | Vinyl
Silhouette Cameo 4 | Blade – 5, Speed – 8, Force – 14, Pass – 1
Silhouette Cameo 3 | Blade – 5, Speed – 8, Force – 14, Pass – 1
Graphtec CE | Blade – 10, Force – 20, Tool – BS001 + 0, Speed 30cm/s
US Cutter Prism | Force – 100, Speed – 300
See Full Instructions: BF METALLIC_spec sheet
BF-MIRROR
Blade: 45° – 60°
Temperature: 150°C – 305°F
Time: 12 Seconds
Pressure: Medium
Peel: Warm, Wait 6 – 7 Seconds
Cutter Settings:
Cricut Explorer | Vinyl
Cricut Maker | Vinyl
Silhouette Cameo 4 | Blade – 5, Speed – 8, Force – 14, Pass – 1
Silhouette Cameo 3 | Blade – 5, Speed – 8, Force – 14, Pass – 1
Graphtec CE | Blade – 10, Force – 20, Tool – BS001 + 0, Speed 40cm/s
US Cutter Prism | Force – 100, Speed – 300
See Full Instructions: BF MIRROR_spec sheet
BF-NYLON
Blade: 45°
Temperature: 145°C – 295°F
Time: 12 Seconds
Pressure: Medium
Peel: Warm, Wait 6 – 7 Seconds
Cutter Settings:
Cricut Explorer | Vinyl
Cricut Maker | Vinyl
Silhouette Cameo 4 | Blade – 2, Speed – 5, Force – 8, Pass – 1
Silhouette Cameo 3 | Blade – 2, Speed – 5, Force – 8, Pass – 1
Graphtec CE | Blade – 10, Force – 17, Tool – BS001 + 0, Speed 40cm/s
US Cutter Prism | Force – 20, Speed – 300
See Full Instructions: BF NYLON_spec sheet
BF-PROMOTIONAL
Blade: 45°
Temperature: 145°C – 295°F
Time: 10 Seconds
Pressure: Medium
Peel: Cold
Cutter Settings:
Cricut Explorer | Vinyl
Cricut Maker | Vinyl
Silhouette Cameo 4 | Blade – 4, Speed – 5, Force – 6, Pass – 1
Silhouette Cameo 3 | Blade – 4, Speed – 5, Force – 6, Pass – 1
Graphtec CE | Blade – 10, Force – 15, Tool – BS001 + 0, Speed 30cm/s
US Cutter Prism | Force – 100, Speed – 300
See Full Instructions: BF-PROMOTIONAL_spec-sheet
BF-REFLEX-COLORED
Blade: 60°
Temperature: 140°C – 285°F
Time: 10 Seconds
Pressure: Medium
Peel: Warm, Wait 6 – 7 Seconds
Cutter Settings:
Cricut Explorer | Vinyl
Cricut Maker | Vinyl
Silhouette Cameo 4 | Blade – 8, Speed – 8, Force – 20, Pass – 1
Silhouette Cameo 3 | Blade – 8, Speed – 8, Force – 20, Pass – 1
Graphtec CE | Blade – 10, Force – 17, Tool – BS001 + 0, Speed 30cm/s
US Cutter Prism | Force – 100, Speed – 300
See Full Instructions: BF REFLEX_spec sheet
BF-REFLEX-STRETCH
Blade: 60°
Temperature: 140°C – 285°F
Time: 10 Seconds
Pressure: Medium
Peel: Warm, Wait 6 – 7 Seconds
Cutter Settings:
Cricut Explorer | Vinyl
Cricut Maker | Vinyl
Silhouette Cameo 4 | Blade – 8, Speed – 8, Force – 20, Pass – 1
Silhouette Cameo 3 | Blade – 8, Speed – 8, Force – 20, Pass – 1
Graphtec CE | Blade – 10, Force – 17, Tool – BS001 + 0, Speed 30cm/s
US Cutter Prism | Force – 100, Speed – 300
See Full Instructions: BF-REFLEX-STRETCH_spec-sheet
BF-SPORT
Blade: 45°
Temperature: 145°C – 295°F
Time: 10 Seconds
Pressure: Medium
Peel: Hot
Cutter Settings:
Cricut Explorer | Vinyl
Cricut Maker | Vinyl
Silhouette Cameo 4 | Blade – 2, Speed – 5, Force – 9, Pass – 1
Silhouette Cameo 3 | Blade – 2, Speed – 5, Force – 9, Pass – 1
Graphtec CE | Blade – 10, Force – 15, Tool – BS001 + 0, Speed 30cm/s
US Cutter Prism | Force – 90, Speed – 300
See Full Instructions: BF-SPORT_spec-sheet_
BF-SPORT-SUBLI
Blade: 45°
Temperature: 130°C – 265°F
Time: 8 Seconds
Pressure: Medium
Peel: Hot
Cutter Settings:
Cricut Explorer | Vinyl
Cricut Maker | Vinyl
Silhouette Cameo 4 | Blade – 2, Speed – 5, Force – 9, Pass – 1
Silhouette Cameo 3 | Blade – 2, Speed – 5, Force – 9, Pass – 1
Graphtec CE | Blade – 10, Force – 15, Tool – BS001 + 0, Speed 30cm/s
US Cutter Prism | Force – 90, Speed – 300
See Full Instructions: BF-SPORT-SUBLI_spec-sheet
BF-STRETCH
Blade: 45°
Temperature: 140°C – 285°F
Time: 10 Seconds
Pressure: Medium
Peel: Cold
Cutter Settings:
Cricut Explorer | Iron On
Cricut Maker | Vinyl
Silhouette Cameo 4 | Blade – 2, Speed – 5, Force – 9, Pass – 1
Silhouette Cameo 3 | Blade – 2, Speed – 5, Force – 9, Pass – 1
Graphtec CE | Blade – 2, Force – 5, Tool – BS001 + 0, Speed 40cm/s
US Cutter Prism | Force – 90, Speed – 300
See Full Instructions: BF_STRETCH_spec_sheet
BF-SUBLISTOP
Blade: 45°
Temperature: 140°C – 285°F
Time: 10 Seconds
Pressure: Medium
Peel: Hot
Cutter Settings:
Cricut Explorer | Iron On
Cricut Maker | Iron On
Silhouette Cameo 4 | Blade – 2, Speed – 8, Force – 20, Pass – 1
Silhouette Cameo 3 | Blade – 2, Speed – 8, Force – 20, Pass – 1
Graphtec CE | Blade – 10, Force – 17, Tool – BS001 + 0, Speed 40cm/s
US Cutter Prism | Force – 110, Speed – 300
See Full Instructions: BF-SUBLISTOP_spec-sheet
BF-SUBLISTOP80
Blade: 45°
Temperature: 130°C – 265°F
Time: 8 Seconds
Pressure: Medium
Peel: Hot
Cutter Settings:
Cricut Explorer | Iron On
Cricut Maker | Iron On
Silhouette Cameo 4 | Blade – 2, Speed – 8, Force – 20, Pass – 1
Silhouette Cameo 3 | Blade – 2, Speed – 8, Force – 20, Pass – 1
Graphtec CE | Blade – 10, Force – 17, Tool – BS001 + 0, Speed 40cm/s
US Cutter Prism | Force – 110, Speed – 300
See Full Instructions: BF-SUBLISTOP80_spec-sheet
BF-VARNISH
Blade: 45°
Temperature: 145°C – 295°F
Time: 10 Seconds
Pressure: Medium
Peel: Hot
Cutter Settings:
Cricut Explorer | Vinyl
Cricut Maker | Vinyl
Silhouette Cameo 4 | Blade – 8, Speed – 8, Force – 20, Pass – 1
Silhouette Cameo 3 | Blade – 8, Speed – 8, Force – 20, Pass – 1
Graphtec CE | Blade – 10, Force – 17, Tool – BS001 + 0, Speed 30cm/s
US Cutter Prism | Force – 100, Speed – 300
See Full Instructions: BF VARNISH_spec sheet
BF-WINDSTOP
Blade: 45°
Temperature: 110°C – 230°F
Time: 8 Seconds
Pressure: Medium
Peel: Hot
Cutter Settings:
Cricut Explorer | Vinyl
Cricut Maker | Vinyl
Silhouette Cameo 4 | Blade – 10, Speed – 8, Force – 16, Pass – 1
Silhouette Cameo 3 | Blade – 10, Speed – 8, Force – 16, Pass – 1
Graphtec CE | Blade – 10, Force – 20, Tool – BS001 + 0, Speed 40cm/s
US Cutter Prism | Force – 150, Speed – 300
See Full Instructions: BF-WINDSTOP_spec-sheet
Printable Heat Transfer Vinyl
FIVEPRINT00-01
Blade: 45°
Temperature: 140°C – 285°F
Time: 4 Seconds
Pressure: Medium
Peel: Hot
Special Instructions: Do not mirror, Wait 8 hours after printing to cut
Cutter Settings:
Cricut Explorer | Vinyl
Cricut Maker | Iron On
Silhouette Cameo 4 | Blade – 2, Speed – 5, Force – 14, Pass – 1
Silhouette Cameo 3 | Blade – 2, Speed – 5, Force – 14, Pass – 1
Graphtec CE | Blade – 10, Force – 15, Tool – BS001 + 0, Speed 40cm/s
US Cutter Prism | Force – 100, Speed – 300
See Full Instructions: FIVE PRINT00-01_spec sheet
FIVEPRINTTOPM-G
Blade: 45°
Temperature: 140°C – 285°F
Time: 4 Seconds
Pressure: Medium
Peel: Hot
Special Instructions: Do not mirror, Wait 8 hours after printing to cut
Cutter Settings:
Cricut Explorer | Vinyl
Cricut Maker | Iron On
Silhouette Cameo 4 | Blade – 2, Speed – 5, Force – 14, Pass – 1
Silhouette Cameo 3 | Blade – 2, Speed – 5, Force – 14, Pass – 1
Graphtec CE | Blade – 10, Force – 15, Tool – BS001 + 0, Speed 40cm/s
US Cutter Prism | Force – 100, Speed – 300
See Full Instructions: FIVE PRINTTOP M-G_spec sheet_
BF-PRINTTOPM-G
Blade: 45°
Temperature: 145°C – 295°F
Time: 8 Seconds
Pressure: Medium
Peel: Hot
Special Instructions: Do not mirror, Wait 8 hours after printing to cut
Cutter Settings:
Cricut Explorer | Vinyl
Cricut Maker | Iron On
Silhouette Cameo 4 | Blade – 2, Speed – 5, Force – 14, Pass – 1
Silhouette Cameo 3 | Blade – 2, Speed – 5, Force – 14, Pass – 1
Graphtec CE | Blade – 10, Force – 15, Tool – BS001 + 0, Speed 40cm/s
US Cutter Prism | Force – 100, Speed – 300
See Full Instructions: BF PRINTTOP M-G_spec sheet
BF-PRINT00-BF-PRINT01
Blade: 45°
Temperature: 140°C – 285°F
Time: 10 Seconds
Pressure: Medium
Peel: Hot
Special Instructions: Do not mirror, Wait 8 hours after printing to cut
Cutter Settings:
Cricut Explorer | Vinyl
Cricut Maker | Iron On
Silhouette Cameo 4 | Blade – 2, Speed – 5, Force – 14, Pass – 1
Silhouette Cameo 3 | Blade – 2, Speed – 5, Force – 14, Pass – 1
Graphtec CE | Blade – 10, Force – 15, Tool – BS001 + 0, Speed 40cm/s
US Cutter Prism | Force – 100, Speed – 300
See Full Instructions: BF PRINT00-01_spec sheet
BF-PRINT03
Blade: 45°
Temperature: 145°C – 295°F
Time: 12 Seconds
Pressure: Medium
Peel: Hot
Special Instructions: Do not mirror, Wait 8 hours after printing to cut
Cutter Settings:
Cricut Explorer | Vinyl
Cricut Maker | Vinyl
Silhouette Cameo 4 | Blade – 8, Speed – 8, Force – 20, Pass – 1
Silhouette Cameo 3 | Blade – 8, Speed – 8, Force – 20, Pass – 1
Graphtec CE | Blade – 10, Force – 17, Tool – BS001 + 0, Speed 30cm/s
US Cutter Prism | Force – 100, Speed – 300
See Full Instructions: BF-PRINT03_spec-sheet
BF-PRINT04
Blade: 45°
Temperature: 145°C – 295°F
Time: 12 Seconds
Pressure: Medium
Peel: Hot
Special Instructions: Do not mirror, Wait 8 hours after printing to cut
Cutter Settings:
Cricut Explorer | Vinyl
Cricut Maker | Vinyl
Silhouette Cameo 4 | Blade – 10, Speed – 8, Force – 16, Pass – 1
Silhouette Cameo 3 | Blade – 10, Speed – 8, Force – 16, Pass – 1
Graphtec CE | Blade – 10, Force – 20, Tool – BS001 + 0, Speed 40cm/s
US Cutter Prism | Force – 150, Speed – 300
See Full Instructions: BF-PRINT04_spec-sheet_
BF-PRINT50
Blade: 45°
Temperature: 140°C – 285°F
Time: 6 Seconds
Pressure: Medium
Peel: Warm, Wait 6 – 7 Seconds
Special Instructions: Do not mirror, Wait 8 hours after printing to cut
Cutter Settings:
Cricut Explorer | Iron On
Cricut Maker | Vinyl
Silhouette Cameo 4 | Blade – 2, Speed – 5, Force – 9, Pass – 1
Silhouette Cameo 3 | Blade – 2, Speed – 5, Force – 9, Pass – 1
Graphtec CE | Blade – 2, Force – 5, Tool – BS001 + 0, Speed 40cm/s
US Cutter Prism | Force – 90, Speed – 300
See Full Instructions: BF-PRINT50_spec-sheet
BF-PRINTFATTY_BF-PRINTFATTYUV
Blade: 60°
Temperature: 150°C – 305°F
Time: 15 Seconds
Pressure: Light – Medium
Peel: Hot
Special Instructions: Do not mirror, Wait 8 hours after printing to cut
Cutter Settings:
Cricut Explorer | Light Cardstock
Cricut Maker | Light Cardstock
Silhouette Cameo 4 | Blade – 10, Speed – 1, Force -33, Pass – 1
Silhouette Cameo 3 | Blade – 10, Speed – 1, Force – 33, Pass – 1
Graphtec CE | Blade – 32, Force – 26, Tool – BS002 + 0, Speed 30cm/s
US Cutter Prism | Force – 280, Speed – 300
See Full Instructions: BF PRINTFATTY-PRINTFATTYUV_spec sheet
BF-PRINTFLOCK
Blade: 60°
Temperature: 160°C – 320°F
Time: 16 Seconds
Pressure: Light – Medium
Peel: Hot
Special Instructions: Do not mirror, Wait 8 hours after printing to cut
Cutter Settings:
Cricut Explorer | Vinyl
Cricut Maker | Vinyl
Silhouette Cameo 4 | Blade – 4, Speed – 5, Force -6, Pass – 1
Silhouette Cameo 3 | Blade – 4, Speed – 5, Force – 6, Pass – 1
Graphtec CE | Blade – 10, Force – 15, Tool – BS001 + 0, Speed 30cm/s
US Cutter Prism | Force – 100, Speed – 300
See Full Instructions: BF-PRINTFLOCK_spec-sheet
BF-PRINTFLOCK-SUBLI
Blade: 60°
Temperature: 160°C – 320°F
Time: 16 Seconds
Pressure: Light
Peel: Hot
Special Instructions: Mirror on Sublimation Paper, Do not mirror on Vinyl, Wait 8 hours after printing to cut
Cutter Settings:
Cricut Explorer | Vinyl
Cricut Maker | Vinyl
Silhouette Cameo 4 | Blade – 4, Speed – 5, Force -6, Pass – 1
Silhouette Cameo 3 | Blade – 4, Speed – 5, Force – 6, Pass – 1
Graphtec CE | Blade – 10, Force – 15, Tool – BS001 + 0, Speed 30cm/s
US Cutter Prism | Force – 100, Speed – 300
See Full Instructions: BF-PRINTFLOCKSUBLI_spec-sheet
BF-PRINTGLITTER
Blade: 45°
Temperature: 150°C – 305°F
Time: 10 Seconds
Pressure: Medium
Peel: Hot
Special Instructions: Do not mirror, Wait 8 hours after printing to cut
Cutter Settings:
Cricut Explorer | Vinyl
Cricut Maker | Vinyl
Silhouette Cameo 4 | Blade – 10, Speed – 8, Force -16, Pass – 1
Silhouette Cameo 3 | Blade – 10, Speed – 8, Force – 16, Pass – 1
Graphtec CE | Blade – 10, Force – 20, Tool – BS001 + 0, Speed 40cm/s
US Cutter Prism | Force – 150, Speed – 300
See Full Instructions: BF-PRINTGLITTER_spec-sheet
BF-PRINTGLOW
Blade: 45°
Temperature: 145°C – 295°F
Time: 12 Seconds
Pressure: Medium
Peel: Warm, 6 – 7 Seconds
Special Instructions: Do not mirror, Wait 8 hours after printing to cut
Cutter Settings:
Cricut Explorer | Vinyl
Cricut Maker | Vinyl
Silhouette Cameo 4 | Blade – 8, Speed – 8, Force -20, Pass – 1
Silhouette Cameo 3 | Blade – 8, Speed – 8, Force – 20, Pass – 1
Graphtec CE | Blade – 10, Force – 17, Tool – BS001 + 0, Speed 30cm/s
US Cutter Prism | Force – 100, Speed – 300
See Full Instructions: BF-PRINTGLOW_spec-sheet_
BF-PRINTNYLON
Blade: 45°
Temperature: 130°C – 265°F
Time: 12 Seconds
Pressure: Medium
Peel: Hot
Special Instructions: Do not mirror, Wait 8 hours after printing to cut
Cutter Settings:
Cricut Explorer | Vinyl
Cricut Maker | Iron On
Silhouette Cameo 4 | Blade – 2, Speed – 5, Force -14, Pass – 1
Silhouette Cameo 3 | Blade – 2, Speed – 5, Force – 14, Pass – 1
Graphtec CE | Blade – 10, Force – 15, Tool – BS001 + 0, Speed 40cm/s
US Cutter Prism | Force – 100, Speed – 300
See Full Instructions: BF-PRINTNYLON_spec-sheet
BF-PRINTPEARL
Blade: 45°
Temperature: 145°C – 295°F
Time: 10 Seconds
Pressure: Medium
Peel: Hot
Special Instructions: Do not mirror, Wait 8 hours after printing to cut
Cutter Settings:
Cricut Explorer | Vinyl
Cricut Maker | Iron On
Silhouette Cameo 4 | Blade – 2, Speed – 5, Force -14, Pass – 1
Silhouette Cameo 3 | Blade – 2, Speed – 5, Force – 14, Pass – 1
Graphtec CE | Blade – 10, Force – 15, Tool – BS001 + 0, Speed 40cm/s
US Cutter Prism | Force – 100, Speed – 300
See Full Instructions: BF-PRINTPEARL_spec-sheet
BF-PRINTREFLEX
Blade: 60°
Temperature: 150°C – 305°F
Time: 10 Seconds
Pressure: Medium
Peel: Warm, Wait 6 – 7 Seconds
Special Instructions: Do not mirror, Wait 8 hours after printing to cut
Cutter Settings:
Cricut Explorer | Vinyl
Cricut Maker | Vinyl
Silhouette Cameo 4 | Blade – 8, Speed – 8, Force – 20, Pass – 1
Silhouette Cameo 3 | Blade – 8, Speed – 8, Force – 20, Pass – 1
Graphtec CE | Blade – 10, Force – 17, Tool – BS001 + 0, Speed 30cm/s
US Cutter Prism | Force – 100, Speed – 300
See Full Instructions: BF-PRINTREFLEX_spec-sheet
BF-PRINTSU
Blade: 45°
Temperature: 140°C – 285°F
Time: 10 Seconds
Pressure: Medium
Peel: Hot
Special Instructions: Do not mirror, Wait 8 hours after printing to cut
Cutter Settings:
Cricut Explorer | Vinyl
Cricut Maker | Vinyl
Silhouette Cameo 4 | Blade – 8, Speed – 8, Force – 20, Pass – 1
Silhouette Cameo 3 | Blade – 8, Speed – 8, Force – 20, Pass – 1
Graphtec CE | Blade – 10, Force – 17, Tool – BS001 + 0, Speed 30cm/s
US Cutter Prism | Force – 100, Speed – 300
See Full Instructions: BF PRINTSU_spec sheet
BF-PRINTSU80
Blade: 45°
Temperature: 130°C – 265°F
Time: 8 Seconds
Pressure: Medium
Peel: Hot
Special Instructions: Do not mirror, Wait 8 hours after printing to cut
Cutter Settings:
Cricut Explorer | Vinyl
Cricut Maker | Iron On
Silhouette Cameo 4 | Blade – 2, Speed – 5, Force – 14, Pass – 1
Silhouette Cameo 3 | Blade – 2, Speed – 5, Force – 14, Pass – 1
Graphtec CE | Blade – 10, Force – 15, Tool – BS001 + 0, Speed 40cm/s
US Cutter Prism | Force – 100, Speed – 300
See Full Instructions: BF-PRINTSU80_spec-sheet
BF-PRINTUV
Blade: 45°
Temperature: 140°C – 285°F
Time: 10 Seconds
Pressure: Medium
Peel: Hot
Special Instructions: Do not mirror, Wait 8 hours after printing to cut
Cutter Settings:
Cricut Explorer | Vinyl
Cricut Maker | Iron On
Silhouette Cameo 4 | Blade – 2, Speed – 5, Force – 14, Pass – 1
Silhouette Cameo 3 | Blade – 2, Speed – 5, Force – 14, Pass – 1
Graphtec CE | Blade – 10, Force – 15, Tool – BS001 + 0, Speed 40cm/s
US Cutter Prism | Force – 100, Speed – 300
See Full Instructions: BF-PRINTUV_spec-sheet
BF-MYLAR
Application Steps:
- Remove the protective paper liner
- Apply BF MYLAR with heavy pressure, to the printed material
- Remove the printed material liner
- Place the print on the garment to be decorated
- Apply per instructions of printable material
BF-MYLAR-TECH
Application Steps:
- Remove the protective paper liner
- Apply BF MYLAR TECH with heavy pressure, to the printed material
- Remove the printed material liner
- Place the print on the garment to be decorated
- Apply per instructions of printable material