BF PRINTFLOCK is a printable thermo-transferable viscose film with solvent-based, eco-solvent and latex inks, with a flock finishing and velvet.
Thanks to its self-adhesive PET film carrier even very small letters and logos can be easily cut by all current cutting plotters after the printing process.
We recommend using BF MYLAR as a transfer tape and as a protection during the heat transfer, and then remove it while hot.
Cotton, polyester, mixed.
Cutting plotter, 45 ° blade, laser. Wait at least 8 hours after printing, before proceeding with cutting.
Wait 12 hours after application.
Via 1° Maggio, 44, 36050
Sovizzo (VI) Italy
Tel: +39 0444028139
468 Columbia Industrial Blvd,
Evans, GA 30809 USA
Tel: +1 (866) 440-BFLX
B-FLEX PACIFIC PTY LTD
5 Raceway Pl,
Eastern Creek, NSW 2766 Sydney, Australia
Ph.: +61 2 8662 0801
Email (required) *
Example: Yes, I would like to receive emails from B-Flex America. (You can unsubscribe anytime)